Sifalumin No 15 4043 Aluminium Tig Filler Rods 2.5Kg

Suitable for welding duralumin cast (LM25) and wrought aluminium alloys such as 6063 (H9), 6061 (H20) and 6082 (H30).

Welding on 6xxx series alloys typical applications include automotive/motorcycle frames, sports products – scooters/bicycles, general repair and maintenance.

Sifalumin No 15 should not be used if you are considering the best colour match after post weld anodizing, as this filler alloy will typically turn dark gray in colour after the anodizing process.

Predominantly used during the TIG welding process, welding current AC using shielding gases such as argon at 5-10 l/min, Helium at 8-16 l/min or Argon/Helium mix at 5-10 l/min

    Can be used Oxy Acetylene welding processes, If used with Oxy Acetylene use the Sif No. 36 aluminium brazing and welding flux.    

Classification.

    EN ISO 18273  S Al 4043A (AlSi5),

    BS: 2901 4043A, (NG21)

Typical Weld Metal Composition.

    Si 5 %

    Al Bal

Typical All-Weld Metal Mechanical Properties.

Yield strength, Re: 55 MPa

Tensile strength, Rm: 140 MPa

Elongation, A5: 10%

    Melting Point 635°C

    Ult Tensile Strength 120 N/mm²

    Hardness 40

MATERIAL TO

WELDING POSITIONS