Optrel E3000 PAPR c/w Crystal 2.0 Auto Darkening Head Shield

Optrel E3000 PAPR c/w Crystal 2.0 Auto Darkening Head Shield
Optrel E3000 PAPR c/w Crystal 2.0 Auto Darkening Head Shield4550400GOPT4550400GOPT

The Optrel Crystal 2.0 is a Crystal Lens Technology (CLT2.0) lightweight semi-automated welding shield with a ADF which automatically darkens as soon as the welding arc ignites. ...read more

Buy Now
CodeDescriptionPrice Each*QTY
73183OPTREL CRYSTAL2.0 & E3000 PAPR 10HR BATT£1,044.00 Stock getting low; potential 1-2 days lead time.

[+] show all Stock Availability

* All prices exclude VAT

Add To Basket
We have added this product to your order:
Optrel E3000 PAPR c/w Crystal 2.0 Auto Darkening Head Shield
Optrel E3000 PAPR c/w Crystal 2.0 Auto Darkening Head Shield
View More Products    Continue To Checkout

Stock Level Indicator

A traffic light system illustrates the stock availability of items on our website, as follows:

Green Good stocks currently available.
Amber Stock getting low; potential 1-2 days lead time.
Red Out of stock; allow up to 7 days lead time.

As you click to order an item, the relevant circle will appear next to the order quantity box.

The Optrel Crystal 2.0 is a Crystal Lens Technology (CLT2.0) lightweight semi-automated welding shield with a ADF which automatically darkens as soon as the welding arc ignites. No manual shade level settings are necessary, the Optrel Crystal 2.0 automatically adjusts to give the correct level of protection depending on the intensity of the welding arc . Automatic shade level adjustment. +/- 2 allows for individual manual offset, sensitivity adjustment, and opening delay with the twilight function. The Crystal 2.0 is perfectly combined for use with the Optrel E3000 PAPR respiratory system. With its integrated high-performance particle filter (TH3), welders are adequately protected against smoke, dust, and aerosols.


Safety regulations mandate that the air flow has to be checked before every PAPR use. Compared to other respiratory systems, which require a manual air flow check at start-up, the e3000 automatically checks air flow, decreasing the amount of time a welder needs to monitor the start-up.

The E3000 & Crystal 2.0 combination offers maximum comfort with the adjustable air flow rates from 150 to 250 nl/min. Constant flow thanks to smart sensor-controlled electronics, this results in the best possible comfort for the welder causing less operator fatigue, a major factor of reduced production.

The high flow rate of 250l/min. offers the benefit of high comfort level, even at ambient high-temperature conditions.

Efficient battery management provides operating times up to 10 hours continuous welding process with the standard battery without interruptions, more effective working time for the welder.

Optimised operating costs with the filter system consisting of a pre-filter and a particle filter. The big surface area of the particle filter slows down the clogging of the filter. This characteristic as well as the smart concept of filter replacement supports the user to optimise the total cost of ownership. The E3000 also as no filter” detection unlike other PAPR systems available, if the E3000 detects when the main filter is missing it will stop working for enhanced safety.

E3000 Specification:

Protection Level: TH3P classification (Europe)

Blower Unit all Levels Controlled and Calibrated to Standard Conditions: 20° C and 0 meters above sea level (1013 hPa)

High Quality Ball Bearing Long Life Brushless Motor

Noise Level: Max. 60dB(A)

Alarm Type: Optical and audible alarm for low battery, clogged filter, no filter fitted and low air flow

Battery Li-Ion Rechargeable:

Standard: 14.8V / 2.5Ah

Battery Weight: Standard: 420g

Operating Time Level 1 150 nl/min: Standard Battery: 10h

Operating Time Level 2 200 nl/min: Standard Battery: 8h

Operating Time Level 3 250 nl/min: Standard Battery: 6h

Charging time: Standard Battery: 5h

Hose Length: 1160 mm, elastic up to 1300mm with protective sleeve - Weight: 185 g

Weight: 1195g (excluding battery)

Dimensions (L x W x H): 249 x 213 x 87mm

Crystal 2.0 Features:

The Optrel Crystal 2.0 is a welding helmet equipped with the new CLT auto-darkening technology. This gives you a visual impression comparable to that when looking through a window pane. In fact, 92% of the visible colour spectrum corresponds to that of a neutral window pane. This also has a positive effect on the brightness level. With a protection level of 2.0 in its light state, you can see your working environment as if you were not wearing an auto darkening lens at all.

Superior visibility before and during welding dramatically increases your safety at work. No stumbling, No unintentional contact with dangerous workpieces and fewer injuries.

Adaptive protection level control sets the right protection level automatically in a range between 4 and 12. This is ensured by an additional brightness sensor which measures the intensity of the welding arc. This means that you are perfectly protected at all times, no matter what parameters you are welding with. Manual adjustments are no longer necessary

Brightness level: The crystal 2.0 sees Optrel beat the best brightness level, which it set itself and which had never been achieved previously. Light transmission in the inactive state is now 31%.

True colour: As far as always, the distinction can be seen upon taking a closer look. With the crystal 2.0 you will recognise the difference immediately when putting it on. The colour perception in light state is almost like looking through clear window glass and in dark mode you enjoy a detailed and high-contrast view of the welding pool with a never-seen-before clearness.

Heat-reflecting paint: Helping you keep a cool head at all times.

Two channel air distribution: This unique internal design presents clean air to the mouth and nose, plus up to 20% of the air flow can be divert on to the forehead for cooling depending on environmental needs or personal comfort preferences This improves the overall comfort while reducing fatigue over time. depending on environmental needs or personal comfort preferences.

Sensor slide: Set the sensor detection angle individually to your requirements

Twilight function: Unlike other adaptive lenses that rapidly return to light, the twilight feature light more naturally after the weld is complete, this presents a smooth transition for the eyes. This unique feature will reduce your eye fatigue and help you work longer and much safer.

Patented excentre: Positions the helmet optimally on your head – with just one twist.

Sensitivity control: Adapts the helmet to your environment and requirements.

Comfort headband: Offers an optimized weight balance to protect your neck and your back.

Grind mode: The brightest vision during grinding work ever to be offered by a welding helmet.

Crystal 2.0 Specification:

Shade level inactive: Shade level 2.0

Shade Levels active, manual: shade level 4-12

Shade Levels Autopilot: Automatic protection level regulation across a range from 4-12 with individual calibration option of ± 2

Power supply: Solar cells, 2 lithium batteries (CR2032)

Sensors: Three Sensors

Sensitivity: Infinitely adjustable, with “super high” sensitivity

Switching time: bright to dark: 0.100 ms at room temperature at 55°C

Dark to bright: 0.1 s to 2.0 s (with Twilight function)

EN379 classification:   
Optical class: 1
Scattered light: 1
Homogeneity: 1
Angular dependence: 2

Shape stability: Welding mask: up to 220 °C / 428 °F
Front cover lens: up to 137 °C / 279 °F

Eye protection: Ultraviolet / Infrared protection maximum protection at any shade level

Operating temperature -10°C to + 70°C / 14°F to 158°F

Storage temperature -20°C to + 80°C / -4°F to 176°F

Weight 460g

Compatible with NIOSH-approved Optrel e3000 PAPR system, which when used together offers TH3 protection.

Exclusive 3 Years Warranty on all Optrel Welding Helmets excluding Batteries when registered.

We welcome your feedback and comments

Email Address
Telephone No.



Recently Viewed Products